Les Paul Standard 60s with “Sparkling Burgundy Top” Gibson Les Paul Standard 60s, 2023.
Mahogany body with maple top and no weight relief, mahogany neck with Slim Taper profile, Rose fingerboard, Burstbucker 61R & Burstbucker 61T PUs, hand-wired electrics with Orange drop capacitors, Grover pegs, unwired ABR bridge with aluminum bridge tailpiece.
This is a 60s style Les Paul Standard in the historic Gibson Custom color of the 1960s with non-weight relief.
It shows some signs of use (picking marks on the pickguard film, fogging of metal parts and screws, and other exterior damage).
The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) when it arrived, the fret board is high enough to play, and the truss rod can be adjusted to +/- 60 degrees.
Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 213930182
Year of manufacture: 2023
Country of manufacture: USA
Case: Hard Case
Weight: 4.65kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.31mm
Neck thickness near 1st fret: 21.36mm
Neck thickness near 12th fret: 23.53mm
SCALE: 628mm (24.75″)
RADIUS: 254mm (10″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
213930182
Year of manufacture
2023
Country of manufacture
U.S.A.
Case
Hard case
Weight
4.65kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Leftover frets
No problem, sufficient fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
43.31mm
Neck thickness near 1st fret
21.36mm
Neck thickness near 12th fret
23.53mm
Scale
628mm (24.75″)
RADIUS
254mm (10″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Reviews
There are no reviews yet.